USB Speakers

USB speaker MD-D1

USB speaker MD-A02

Features:
Built-In Replaceable&Rechargeable Lithium-ion battery (New Feature)
Equipped with High-quality horn
Rich, Full-Range Sound From Compact Speaker With Backup Power Supply.
Stereo, Ultra-low sound.
Plays music stored on SD/MMC card,USB disc directly.
Connects to ipod, iphone, Notebook, Computers, MP3, MP4, mobile phone and more.
Strict Quality control, Long Warranty
MD-A02 Mini mobile Speaker Accessory:
1. 3.5mm interface extension line
2. 3.5mm to 2.5mm interface connector
3. 3.5mm to Nokia N73, N70 interface connector
4. 3.5mm to Sony Ericsson w800c interface connector
5. Remote Controller

Functional Parameter:

Output: RMS 6W(3W + 3W) THD = 10%
Frequency response: 150 -1800HZ
Signal and noise ratio of power amplifier ≥80dB
Loud speaker: 1.5 inch (extermal diameter 50mm)
            Magnetic resistant 40hms

Technical Specification :

Input : 5.0V
Output: 3.7V*1000MA
Built-in rechargeable Li-ion Battery

Dimension: 14.8cm * 10.6cm * 8.6cm
Weight: 600g
Operation Manual:

1 Connect DC5V adaptor to the DC5V power input socket of speaker, and to charge or recharge
  this speaker system.
2 With SD/MMC, U disc reader (Maximum support 2G), MP3 format music can be played.
3 No need to shift among U disc/SD/MMC, speaker automatically read the first input media device. If first put SD/MMC, you need to take out SD/MMC card, then speaker can read MP3 music file from U disc.
4 “|◀ ”Volume – / Backward, Long press this button, Volume decreased, Short press this button,
  Music shifted to the upper one, “ ▶| ” Volume + / Forward, Long press this button, Volume increased, Short press this button, music shifted to the next one. “■” this button is for pause and play.
5 Connect 3.5 mm stereo audio cable to speaker socket “LINE IN”, you can enjoy the music from mobile phone, MP3, MP4, IPHONE, IPOD, PC and other audio devices.

Warning:
Charged by USB & Nokia mobile phone chargers which meet the safety standard,or it will
explode and affect the speaker’s function.The product can not be used when it is charging.

USB speaker MD-A05

Features:

Built-In Replaceable&Rechargeable Lithium-ion battery (New Feature)
Equipped with High-quality horn
Rich, Full-Range Sound From Compact Speaker With Backup Power Supply.
Stereo, Ultra-low sound.
Plays music stored on SD/MMC card,USB disc directly.
Connects to ipod, iphone, Notebook, Computers, MP3, MP4, mobile phone and more.
Strict Quality control, Long Warranty
MD-A05 Mini mobile Speaker Accessory:
1. 3.5mm interface extension line
2. 3.5mm to 2.5mm interface connector
3. 3.5mm to Nokia N73, N70 interface connector
4. 3.5mm to Sony Ericsson w800c interface connector
5. Remote Controller

Functional Parameter:

Output: RMS 6W(3W + 3W) THD = 10%
Frequency response: 150 -1800HZ
Signal and noise ratio of power amplifier ≥80dB
Loud speaker: 1.5 inch (extermal diameter 50mm)
            Magnetic resistant 40hms

Technical Specification :

Input : 5.0V
Output: 3.7V*1000MA
Built-in rechargeable Li-ion Battery

Dimension: 14.8cm * 10.6cm * 8.6cm
Weight: 600g
Operation Manual:

1 Connect DC5V adaptor to the DC5V power input socket of speaker, and to charge or recharge
  this speaker system.
2 With SD/MMC, U disc reader (Maximum support 2G), MP3 format music can be played.
3 No need to shift among U disc/SD/MMC, speaker automatically read the first input media device. If first put SD/MMC, you need to take out SD/MMC card, then speaker can read MP3 music file from U disc.
4 “|◀ ”Volume – / Backward, Long press this button, Volume decreased, Short press this button,
  Music shifted to the upper one, “ ▶| ” Volume + / Forward, Long press this button, Volume increased, Short press this button, music shifted to the next one. “■” this button is for pause and play.
5 Connect 3.5 mm stereo audio cable to speaker socket “LINE IN”, you can enjoy the music from mobile phone, MP3, MP4, IPHONE, IPOD, PC and other audio devices.

Warning:
Charged by USB & Nokia mobile phone chargers which meet the safety standard,or it will
explode and affect the speaker’s function.The product can not be used when it is charging.

USB speaker MD-632

FEATURES:

 Output Power : 3W*2Frequency Response:150Hz – 18KHz                                                                                                   Speaker :dia40mm ; 4Ohms       Sensitivity:>80db                                                                                                                                               Built in rechargeable Li-ion Batt Read MMC/SD card/ MP3 file (music) in USB movable disk. Portable speaker, especial design for USB, SD card and mobile phone.
* Support SD card, USB memory. Support MP3 edition music.
* Support connect with MP3, MP4, PSP, iPhone etc players by 3.5 mm audio cable.
* Full function supports remote control. You can choose the next or previous music, and play or pause. Increase or decrease the volume.
* Build-in Lithium battery.
* Power LED leading.
Parameter:
* Power input: Lithium battery, power adaptor (+5V, 800MA), USB cable.
* Power output: 3w * 2 (RMS)s
* Loudspeaker size: Dia: 52mm, 4ohms
* Frequency: 150-18KHz
Packing:
* Speaker, USB cable, Audio cable, Remote control, Manual.

USB speaker MD-631

FEATURES:

Output Power : 3W*2Frequency Response:150Hz – 18KHz                                                                                                  Speaker :dia40mm ; 4Ohms       Sensitivity:>80db                                                                                                                                              Built in rechargeable Li-ion Batt Read MMC/SD card/ MP3 file (music) in USB movable disk. Portable speaker, especial design for USB, SD card and mobile phone.
* Support SD card, USB memory. Support MP3 edition music.
* Support connect with MP3, MP4, PSP, iPhone etc players by 3.5 mm audio cable.
* Full function supports remote control. You can choose the next or previous music, and play or pause. Increase or decrease the volume.
* Build-in Lithium battery.
* Power LED leading.
Parameter:
* Power input: Lithium battery, power adaptor (+5V, 800MA), USB cable.
* Power output: 3w * 2 (RMS)s
* Loudspeaker size: Dia: 52mm, 4ohms
* Frequency: 150-18KHz
Packing:
* Speaker, USB cable, Audio cable, Remote control, Manual.

USB speaker MD-630

Features:

Output Power : 3W*2Frequency Response:150Hz – 18KHz                                                                                                     Speaker :dia40mm ; 4Ohms       Sensitivity:>80db                                                                                                                                             Built in rechargeable Li-ion Batt Read MMC/SD card/ MP3 file (music) in USB movable disk. Portable speaker, especial design for USB, SD card and mobile phone.
* Support SD card, USB memory. Support MP3 edition music.
* Support connect with MP3, MP4, PSP, iPhone etc players by 3.5 mm audio cable.
* Full function supports remote control. You can choose the next or previous music, and play or pause. Increase or decrease the volume.
* Build-in Lithium battery.
* Power LED leading.
Parameter:
* Power input: Lithium battery, power adaptor (+5V, 800MA), USB cable.
* Power output: 3w * 2 (RMS)s
* Loudspeaker size: Dia: 52mm, 4ohms
* Frequency: 150-18KHz
Packing:
*Speaker, USB cable, Audio cable, Remote control, Manual.

USB speaker MD-629

Features:

Output Power : 3W*2Frequency Response:150Hz – 18KHz                                                                                                   Speaker :dia40mm ; 4Ohms       Sensitivity:>80db                                                                                                                                              Built in rechargeable Li-ion Batt Read MMC/SD card/ MP3 file (music) in USB movable disk. Portable speaker, especial design for USB, SD card and mobile phone.
* Support SD card, USB memory. Support MP3 edition music.
* Support connect with MP3, MP4, PSP, iPhone etc players by 3.5 mm audio cable.
* Full function supports remote control. You can choose the next or previous music, and play or pause. Increase or decrease the volume.
* Build-in Lithium battery.
* Power LED leading.
Parameter:
* Power input: Lithium battery, power adaptor (+5V, 800MA), USB cable.
* Power output: 3w * 2 (RMS)s
* Loudspeaker size: Dia: 52mm, 4ohms
* Frequency: 150-18KHz
Packing:
*Speaker, USB cable, Audio cable, Remote control, Manual.

USB speaker MD-628

Features:

Mini speaker , USB/SD speaker                                                                                                        Output Power : 3W*2Frequency Response:150Hz – 18KHz                                                    Speaker :dia40mm ; 4Ohms       Sensitivity:>80db                                                                                                                        Built in rechargeable Li-ion Batt Read MMC/SD card/ MP3 file (music) in USB movable disk. Portable speaker, especial design for USB, SD card and mobile phone.
* Support SD card, USB memory. Support MP3 edition music.
* Support connect with MP3, MP4, PSP, iPhone etc players by 3.5 mm audio cable.
* Full function supports remote control. You can choose the next or previous music, and play or pause. Increase or decrease the volume.
* Build-in Lithium battery.
* Power LED leading.
Parameter:
* Power input: Lithium battery, power adaptor (+5V, 800MA), USB cable.
* Power output: 3w * 2 (RMS)s
* Loudspeaker size: Dia: 52mm, 4ohms
* Frequency: 150-18KHz
Packing: 
Speaker, USB cable, Audio cable, Remote control, Manual.

In the past, we have show you how to buy USB speaker samples and how to Confirm the Requirements during OEM.

Now, how to calculate the cost of USB speaker sample delivery?

USB SPEAKER usually taken with a box packaging, if you have multiple USB SPEAKER samples, then put these USB SPEAKER samples in a small CARTON box, as far as possible to the minimum of the most solid volume loading. Because long-distance transport, so the outside use tape sealed in order to avoid ruining the box during the transportation.

Then weigh the USB SPEAKER sample, if the weight is 7.3KG, then it will be considered as 7.5KG, if the weight is 7.7KG, it will be calculated as 8KG. At the same time, measure the Length, Width and Height of the USB SPEAKER samples box. Such as the USB SPEAKER sample box with L W H 30 * 32 * 38CM, then the total volume of 36,480 square centimeters, with 36,480 divided by 5,000, then calculated the volume weight is 7.296KG, that is, according to 7.5KG.

If the USB SPEAKER prior to the actual weight of the sample said that for the 6KG, then the sample weight is 7.5KG; if the USB SPEAKER sample is known prior to the actual weight of 8KG, then, freight cost is based on the actual weight. That means, the weighter one counts.

DHL Freight is less than a certain weight they will have the price of continued price 0.5KG + count (per 0.5KG considered an added weight).

For example, if the USB SPEAKER sample weight 8KG, then the first weight 0.5KG, added weight of 8-0.5 = 7.5KG, 7.5KG/0.5 = 15 added weight, if the 210RMB, added weight to calculate the 60RMB then this USB SPEAKER samples DHL freight: 210 +15 * 60 = 1110RMB, converted into U.S. dollars: 1110/6.82 = 162.76USD.

So this kind of freight on the USB SPEAKER is 162.76USD, it would be possible to tell the customer freight, of course, some customers are DHL account number to pay by the client side according to local standard of the freight. The actual DHL rates is necessary to link real-time rates for DHL agent query, because sometimes DHL rates may change because of fuel and so on.

At first, we talked about How to buy USB speaker samples. Now, it’s time to confirm the requirements during OEM.

When clients select a USB SPEAKER, after confirming the sample, then it’s the process of specifically requirements of OEM.

What about the specific requirements of USB SPEAKER OEM? You can follow the following steps specifically to make sure everything:

1. First confirm USB SPEAKER appearance. If it’s wooden box, the skin color and pattern should be specified. The button whether or not needs to be electroplated, card reader and USB plugin port location needs to move or not, and the color of the loudspeaker mesh.

2. About the printing of USB SPEAKER button. Is a specific language required or not, what’s the color of the printing, and the printing of the input and output port in the back.

3. Then confirm the USB SPEAKER sound quality and power requirements. Different solutions have different output power and sound quality.

4. Final it’s the packaging and brochures of USB SPEAKER. If the packaging is designed by us, the image will be sent to our clients to confirm. If the User Manual needs to use special language, we will send the english version to our clients to translate, then send back to finish the film and printing. the default language of USB SPEAKER User Manual is English.